VOLVO
PDM-B118F00 - Right front window. General Failure Information. No sub type information
Układ
Moduł drzwi pasażera (PDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The right front window has lost its position information, so the automatic window operation stops for that window. The cause may be that initialization was never done, that the setting was lost after a voltage drop while the window lift was in use, or that the control module's power supply was cut.
Możliwe przyczyny
- Initialization was not carried out
- The position setting was lost after a voltage drop when the window lift was activated
- Power to the control module was interrupted
Co możesz zrobić
- 1Check that the control module gets power: the fuses should be intact and the battery connections secure
- 2Try the automatic window operation from the switch by pressing two steps up
- 3Move the window manually to its upper turning position
- 4Have a workshop initialize the window position
- 5Afterwards, check that the automatic operation works and that the fault code does not return
Objawy, które możesz zauważyć1
- Automatic window operation is not working
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.