VOLVO
PDM-B12AB11 - Front Window Position Sensor Power Supply. General Electrical Failures. Circuit short to ground
Układ
Moduł drzwi pasażera (PDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Co oznacza ten kod błędu?
The driver or passenger door module (DDM/PDM) supplies power to the Hall sensor in the front window mechanism. The Hall sensor measures how fast the window motor turns, which is how the window position is determined. The module has flagged a signal from the output that is too low, and it then blocks the automatic window operation. The cause is a power supply wire to the sensor short-circuited to ground.
Możliwe przyczyny
- Power supply cable short-circuited to ground
- Moisture and/or oxidation in the connections
Co możesz zrobić
- 1Check that the relevant fuses are intact
- 2Try the front window from its switch and see whether it can be operated
- 3If you have a diagnostic tool, watch the Hall sensor signal for the front window in live data as the window moves
- 4Use a multimeter to check that the supply wire to the Hall sensor is not short-circuited to ground (the body)
- 5Look for moisture and oxidation in the connectors at the window motor in the front door and remedy them
Objawy, które możesz zauważyć1
- Electric window does not work, works reduced or works incorrectly
Na co może wpływać usterka1
- The control module blocks the automatic window operation
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.