VOLVO
PDM-B12DA13 - Blind Spot Warning Indicator. General Electrical Failures. Circuit open
Układ
Moduł drzwi pasażera (PDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleV40 (2013–), V40 Cross Country (2013–)
Pokaż modele wg rocznika i silnika (2)
Co oznacza ten kod błędu?
The PDM keeps watch on the power feed to the LED that signals when something sits in the blind spot. The module has detected an open circuit in the supply cable to the LED.
Możliwe przyczyny
- The supply cable to the LED has an open circuit
Co możesz zrobić
- 1Read the code, clear it and run a test drive to see whether the blind spot warning LED works and whether the code comes back
- 2Check the fuses in the fuse box and make sure they are intact
- 3Check the connectors at the LED and the door module for loose, oxidised or corroded contacts
- 4Use a multimeter to check that the supply cable to the LED is intact, with no open circuit
- 5If you have diagnostic equipment, activate the blind spot warning LED and check that it lights
- 6If the wire is intact but the code comes back: have a workshop check the LED and the door module
Objawy, które możesz zauważyć2
- Warning lights and chimes come on or behave abnormally
- Warning symbol and text message are shown in the display
Na co może wpływać usterka1
- The power supply to the LED stops
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.