Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    PDM-B12DC54
    VOLVO

    PDM-B12DC54 - Front Window Motion/Position Sensor. System Programming Failures. Missing calibration

    Układ

    Moduł drzwi pasażera (PDM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo S60 (2011–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015

    Co oznacza ten kod błędu?

    Automatic window operation depends on the door module knowing where the window's end stops are and how much resistance the lift meets when moving the glass. If the module loses this information, or judges the values to be incorrect, automatic operation stops working and the code is set. The code is erased automatically once the windows have been initialised again.

    Możliwe przyczyny

    • The glass was driven beyond its previously learned end stop
    • The module lost its position memory after a voltage dip while the lift was running
    • The window has been moved by hand, for example during a workshop visit
    • The initiation routine has been interrupted by pressing the window lift button
    • Movement was blocked on the way down, or the lift now meets different resistance, for instance from warped window seals or a bent door
    • Incorrect signal from the Hall sensor, or incorrect window configuration sent from the CEM

    Co możesz zrobić

    1. 1Initialise the window: hold the window switch until the glass reaches its upper end stop, then do the same for the lower end stop; keep hands clear
    2. 2Check that the window now runs up and down automatically and that the code does not come back
    3. 3Check that the window is not blocked by window seals or by a deformed door
    4. 4If initialisation does not help: work through the other causes of the code, such as the Hall sensor, and then initialise the window again
    5. 5Have a workshop check that the window configuration is correct and whether the control module needs reprogramming

    Objawy, które możesz zauważyć1

    • The electric window does not work, works with reduced function or works incorrectly

    Na co może wpływać usterka1

    • The control module blocks automatic window operation

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.