VOLVO
PDM-DD22 - LIN communication camera module Internal fault
Układ
Moduł drzwi pasażera (PDM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Co oznacza ten kod błędu?
The passenger door module (PDM) handles communication with the camera on the passenger side over LIN, a standardised serial communication method. The module has registered an internal fault in that communication, which causes the code to be set.
Możliwe przyczyny
- A fault inside the camera in the passenger door
Co możesz zrobić
- 1Activate the blind spot system and check that the LEDs flash three times; then start the engine and check that the LED works
- 2Read the code, clear it and run a test drive. If the code does not come back, no further action is needed, as the fault may have been temporary
- 3Check that the connectors at the camera and the door module are secure and free from moisture and oxidation
- 4Check that the wire between the door module and the camera is intact and free from visible damage
- 5If the fault remains: have a workshop check the camera on the passenger side and replace it if needed
Objawy, które możesz zauważyć2
- The LED does not light
- A message is shown in the information display
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.