Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    PDM-U020287
    VOLVO

    PDM-U020287 - Lost Communication With "Door Control Module D". Bus Signal / Message Failures. Missing message

    Układ

    Moduł drzwi pasażera (PDM)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    5 modeli

    S60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)

    Pokaż modele wg rocznika i silnika (5)
    • Volvo S60 (2011–)2011–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015

    Co oznacza ten kod błędu?

    The PDM talks to the rear door on the passenger side over LIN, a standardised serial communication method. The module has registered that the signal from the rear door is missing, and the code is set as a result.

    Możliwe przyczyny

    • Open circuit in the communication cable
    • Communication cable is shorted to ground
    • Communication cable is shorted to supply voltage
    • Contact resistance, oxidation or poor contact in the connections

    Co możesz zrobić

    1. 1Read the code, clear it and run a test drive to see whether it comes back
    2. 2Check the fuses in the fuse box and make sure they are intact
    3. 3Check the connectors in the rear door on the passenger side and at the door module for moisture, oxidation and loose contact
    4. 4Use a multimeter to check that the cable between the door module and the rear door is intact and not shorted to ground or voltage
    5. 5If the wire is intact but the code comes back: have a workshop check the rear door control module

    Objawy, które możesz zauważyć4

    • The electric window in the rear door on the passenger side does not work, works with reduced function or works incorrectly
    • Central locking does not work or works incorrectly
    • The child lock in the rear door does not work
    • The switch indicator does not work

    Na co może wpływać usterka1

    • The control module blocks further codes linked to the rear door from being set

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.