VOLVO
PDM-U210000 - Initial Configuration Not Complete. General Failure Information. No sub type information
Układ
Moduł drzwi pasażera (PDM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
5 modeliS60 (2011–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–)
Co oznacza ten kod błędu?
The driver or passenger door module (DDM/PDM) has not received the car's configuration data from the central electronic module (CEM), so its configuration is not complete. The code clears by itself once the module receives that data from the CEM again, so it may disappear when the fault is fixed.
Możliwe przyczyny
- Open circuit in the control area network (CAN)
- Short circuit to ground in the communication cable
- Short circuit to supply voltage in the communication cable
- Contact resistance, oxidation or poor contact in the connections
Co możesz zrobić
- 1Read and note the codes, clear them and road test the car to see whether the code comes back
- 2Check that the fuses are intact; see the owner's manual for where they are
- 3Check that the connectors and wiring in the CAN network to the door module are secure and free from oxidation and chafing
- 4Use a multimeter to check that the communication wires are not broken and have no contact with ground (the body) or battery positive
- 5If the wiring is sound, have a workshop with diagnostic equipment check the central electronic module (CEM) first, since fault-finding should start there
Objawy, które możesz zauważyć5
- Doors and child lock do not work
- Locking, unlocking and central locking do not work
- Door mirror electrical adjustment does not work
- Power windows do not work, or work reduced or incorrectly
- Door mirror folding and automatic adjustment (memory) do not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.