VOLVO
PHM-E001 - Control module communication Software error
Układ
Moduł telefonu (PHM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
6 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013), XC90 (2003–)
Co oznacza ten kod błędu?
The control modules in the car communicate with each other over the CAN network. The telephone module (PHM) registers a serious disturbance on the low-speed network, where CAN communication is blocked and the telephone module cannot be reached. The fault is linked to a software or communication error in the network.
Możliwe przyczyny
- Short circuit between the CAN wires
- Break in one of the CAN wires
- Internal fault in the telephone module (PHM)
- Internal fault in another control module on the same part of the CAN network
Co możesz zrobić
- 1If you have diagnostic equipment, read the fault codes in the central electronics control module (CEM) and first trace any code about lost communication
- 2Check that the connectors at the telephone module and the central electronics control module are firmly seated and free from corrosion
- 3If one control module disturbs communication, others can be stuck in limp-home mode. Lift the negative battery terminal for a while and reconnect it to reset them
- 4If the fault remains, have a workshop measure the resistance of the CAN wires and check whether any of them is short-circuited to ground or supply voltage
- 5A control module that communicates faultily must be replaced, but only after the workshop has traced the fault
Objawy, które możesz zauważyć5
- The phone does not work
- The menu system and the steering-wheel phone controls do not work
- The keypad lighting on the phone does not work
- The radio phone mute does not work
- No function or reduced function on the phone or for Volvo On Call
Na co może wpływać usterka2
- The control module switches itself off (bus-off)
- The control module stays switched off until the power supply is broken, and tries to communicate again when power is applied
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.