VOLVO
PHM-E003 - Configuration fault Software fault
Układ
Moduł telefonu (PHM)
Modele Volvo, których dotyczy ten kod błędu
Ten kod błędu ma różne znaczenie w zależności od modelu, rocznika lub silnika. Wybierz znaczenie, które dotyczy Twojego samochodu.
Dotyczy następujących modeli:
6 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013), XC90 (2003–)
Co oznacza ten kod błędu?
The control modules on the CAN network must have the same signal configuration ID to communicate. The telephone module (PHM) compares its ID with the one the central electronics control module (CEM) sends out, and the fault is stored when they do not match. The telephone module then switches itself off from the network, and the phone and Volvo On Call are affected.
Możliwe przyczyny
- Incorrect configuration ID because the module was not built for this car, for example a used unit with different software or hardware
- Break in the CAN wires between the telephone module and the central electronics control module (CEM)
Co możesz zrobić
- 1Has a telephone module recently been replaced or a used one fitted? If so, it is probably the one with the wrong configuration, and a workshop must load the correct software
- 2Read the fault codes in the central electronics control module (CEM) with diagnostic equipment, and first trace the codes for lost communication
- 3Check that the CAN wiring connectors at the telephone module are firmly seated and not corroded
- 4After the work: clear the code and check that it does not come back
Objawy, które możesz zauważyć3
- The mobile phone has problems
- Volvo On Call does not work as it should
- Text window and warning symbol with a text message
Na co może wpływać usterka2
- The control module switches itself off (bus-off)
- The control module responds to diagnostic commands while the fault code is stored
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.