VOLVO
PHM-U014000 - Lost Communication With Central electronic module. General Failure Information. No sub type information
Układ
Moduł telefonu (PHM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The telephone module (PHM) communicates with the central electronics control module (CEM), but receives no answer from the CEM when the ignition is on. The fault can come from loose wires, contact resistance or oxidation in the connectors, or a break in the CAN network. The phone and Volvo On Call can then have limited function.
Możliwe przyczyny
- Loose contact in wires
- Contact resistance or oxidation in connector terminals
- Break in the CAN network
Co możesz zrobić
- 1Check that the connectors at the central electronics control module are firmly seated and not corroded
- 2Make the same check at the connectors of the telephone module
- 3If the connectors are in order, read the fault codes in the central electronics control module with diagnostic equipment, or have a workshop do it
- 4After the repair: clear the code and road test the car to check that it does not come back
Objawy, które możesz zauważyć3
- The mobile phone has problems, and a message appears in the text display
- Volvo On Call does not work as it should
- Text window and warning symbol with a text message
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.