VOLVO
PHM-U019900 - Lost Communication With Driver door module. General Failure Information. No sub type information
Układ
Moduł telefonu (PHM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The telephone module (PHM) communicates with the driver door module (DDM), but gets no reply from it when the ignition is on. The cause may be a damaged fuse, a missing power supply or earth to the module, poor contact in the connections, a module not intended for the car, or a break in the CAN network. The driver door switch panel then does not work.
Możliwe przyczyny
- Damaged fuse
- No power supply to the driver door module (DDM)
- Break in the earth wire to the driver door module (DDM)
- Contact resistance or oxidation in connector terminals
- The driver door module (DDM) is not intended for this car, for example a used unit with different software or hardware
- Break in the CAN network
Co możesz zrobić
- 1Check the fuse for the driver door module in the fuse box. Its location is shown in the owner's manual or on the cover of the box
- 2Switch the ignition on and run the driver window up and down. If the window lifter works, the supply to the driver door module is probably in order
- 3Check that the connectors at the driver door module and at the telephone module are firmly seated and not corroded
- 4If the fault remains, have a workshop trace the driver door module, its supply and the CAN network with diagnostic equipment
Objawy, które możesz zauważyć3
- The driver door switch panel does not work
- Volvo On Call does not work as it should
- Text window and warning symbol with a text message
Na co może wpływać usterka2
- The driver door module (DDM) has limited function
- Old values are used when needed
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.