VOLVO
PSCM-C200B96 - Steering Shaft Torque Sensor 1. Component Failures. Component internal failure
Układ
Moduł wspomagania układu kierowniczego (PSCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
2 modeleS60 (2011–), V60 (2011–)
Co oznacza ten kod błędu?
The power steering control module (PSCM) has measured a steering torque outside the permitted range. The torque sensor in the steering gear measures how much force is put into the steering, so the fault may lie in the sensor, in the connectors or in the control module itself.
Możliwe przyczyny
- Connector problems at the torque sensor: resistance, oxidation or looseness
- Steering gear torque sensor is damaged
- Damaged power steering control module (PSCM)
Co możesz zrobić
- 1Clear the fault code and test drive to see whether it returns
- 2Check that the connectors at the torque sensor and at the control module are firmly seated and free from oxidation
- 3If you have a diagnostic tool: turn the wheel slowly in both directions and check that the steering torque changes evenly
- 4Check that the steering column turns freely and does not bind
- 5Safety note: steering is safety-critical, so have a workshop replace the sensor or the control module if the fault remains
Objawy, które możesz zauważyć3
- Text window with warning symbol and text message
- Steering requires extra or uneven effort
- Other steering or handling problems
Na co może wpływać usterka1
- Steering function is reduced
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.