VOLVO
PSM-B1B8724 - Seat Height Motor Hall Sensor. General Signal Failures. Signal stuck high
Układ
Moduł elektrycznego fotela (PSM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The fault code means no Hall pulses are registered from motor 3, which controls the rear edge height of the seat, even though the motor is activated. Automatic operation of the seat and the outer mirrors then does not work, and neither does the automatic front seat memory adjustment.
Możliwe przyczyny
- Damaged Hall sensor in motor 3
- Signal cable short-circuited to supply voltage
Co możesz zrobić
- 1Check that the seat fuses are intact.
- 2Check that the connector to motor 3 is firmly seated and free from corrosion.
- 3Use a multimeter to check that the signal wire from the Hall sensor has no contact with supply voltage.
- 4If you have a diagnostic tool: run motor 3 and check that the Hall sensor value changes while the motor runs.
- 5If the fault remains, have a workshop check the motor with its Hall sensor and the control module.
Objawy, które możesz zauważyć2
- Automatic operation of the seat and outer mirrors does not work
- The automatic memory adjustment of the front seat is not working
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.