VOLVO
PSM-B1C0124 - Seat Recline Down Switch. General Signal Failures. Signal stuck high
Układ
Moduł elektrycznego fotela (PSM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The power seat control module (PSM) has detected that the backrest recline backward control has been held pressed for longer than allowed, which sets the code. The control may have jammed in the pressed position. The backrest may then stop adjusting as normal.
Możliwe przyczyny
- The backrest recline backward control has jammed in the pressed position
- Damaged control panel
Co możesz zrobić
- 1Check that the seat fuses are intact; their locations are in the owner's manual or on the fuse chart
- 2Press the backrest recline backward control in and release it; it should spring back freely. If it sticks or stays down, the control panel is the fault
- 3Test the seat with the control and check whether the backrest tilts backward while the switch is held and stops when it is released
- 4If you have diagnostic equipment, read the control's status in live data and check that it returns to not-activated when the switch is released
- 5Check that the control panel is firmly fitted and not damaged, wet or dirty around the buttons
- 6Clear the code after the checks and road test the car. If it returns and the control still sticks, replace the control panel
Objawy, które możesz zauważyć3
- Reduced seat function
- Backrest adjustment does not work
- Front seat, power seat adjustment and folding do not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.