VOLVO
PSM-B1C0224 - Memory Store Switch. General Signal Failures. Signal stuck high
Układ
Moduł elektrycznego fotela (PSM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The power seat control module (PSM) has detected that the MEM memory button, used to store a seat position, has been held pressed for longer than allowed, which sets the code. The button may have jammed in the pressed position. Seat positions may then not be stored or recalled as normal.
Możliwe przyczyny
- The memory button has jammed in the pressed position
- Damaged control panel
Co możesz zrobić
- 1Check that the seat fuses are intact; their locations are in the owner's manual or on the fuse chart
- 2Press the MEM button in and release it; it should spring back freely. If it sticks or stays down, the control panel is the fault
- 3Test the seat and check whether stored positions can be saved and recalled when the MEM button is used
- 4If you have diagnostic equipment, read the MEM button's status in live data and check that it returns to not-activated when the button is released
- 5Check that the control panel is firmly fitted and not damaged, wet or dirty around the buttons
- 6Clear the code after the checks and road test the car. If it returns and the MEM button still sticks, replace the control panel
Objawy, które możesz zauważyć4
- Reduced seat function
- Memory buttons do not work
- Front seat, power seat adjustment and folding do not work
- Automatic adjustment to a stored position (memory) does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.