VOLVO
PSM-B1C0524 - Memory #3 Switch. General Signal Failures. Signal stuck high
Układ
Moduł elektrycznego fotela (PSM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The power seat control module (PSM) has detected that memory button 3, used to store a seat position and recall it, has been held pressed for longer than allowed, which sets the code. The button may have jammed in the pressed position. Memory position 3 may then stop working.
Możliwe przyczyny
- Memory button 3 has jammed in the pressed position
- Damaged control panel
Co możesz zrobić
- 1Check that the seat fuses are intact; their locations are in the owner's manual or on the fuse chart
- 2Press memory button 3 in and release it; it should spring back freely. If it sticks or stays down, the control panel is the fault
- 3Test the seat and check whether it moves to stored position 3 when the button is pressed, if a position has been stored
- 4If you have diagnostic equipment, read memory button 3 in live data and check that it returns to not-activated when the button is released
- 5Check that the control panel is firmly fitted and not damaged, wet or dirty around the buttons
- 6Clear the code after the checks and road test the car. If it returns and the button still sticks, replace the control panel
Objawy, które możesz zauważyć4
- Reduced seat function
- Memory buttons do not work
- Front seat, power seat adjustment and folding do not work
- Automatic adjustment to a stored position (memory) does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.