VOLVO
RDAR-U30004A - Control Module. Component Failures. Incorrect component installed
Układ
Nieznany układ / Specyficzny dla marki
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2011–), S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (5)
Co oznacza ten kod błędu?
The digital radio receiver (RDAR) checks its configuration ID against the one that the central electronic module (CEM) broadcasts on the CAN network. If the IDs do not match, the code is stored and the digital radio does not work. The cause can be that the vehicle's configuration file in the CEM does not show a digital radio, or that the receiver is not intended for this car.
Możliwe przyczyny
- Incorrect CAN configuration ID
- The receiver is not meant for this car, for example a used unit with other software or hardware
Co możesz zrobić
- 1Read and note the fault code, clear it and test drive the car to see whether it returns
- 2Check whether the digital radio receiver has been replaced, since a used unit from another car can cause the fault
- 3If the receiver is the correct one for the car, have a workshop update the software in the central electronic module (CEM)
Objawy, które możesz zauważyć1
- The digital radio does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.