VOLVO
REM-6A10 - Door switch. Signal too high
Układ
Tylny moduł elektroniczny (REM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Co oznacza ten kod błędu?
The rear electronic module (REM) receives too high a signal from the door switch that should show the door is closed. This suggests the switch is shorted to supply voltage. The module checks the door status by briefly powering the switches, so the fault also affects the door alarm.
Możliwe przyczyny
- The switch indicating a closed door is shorted to supply voltage
Co możesz zrobić
- 1Read the door status with a diagnostic tool, with the ignition on, and open and close the doors one at a time. The status should change for the door you open
- 2If the status does not change, the fault is permanent. Then only fault-trace the circuit for the door that showed the wrong status
- 3Check that the connector to the door switch is secure and free from oxidation
- 4Use a multimeter to check that the wire from the door switch has no contact with voltage
- 5If the fault remains, have a workshop with diagnostic equipment check the rear electronic module (REM) and the switch
Objawy, które możesz zauważyć3
- General warning lamp on
- Message shown in the text display
- The door alarm does not trigger for the door
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.