VOLVO
REM-8F10 - Position sensor xenon lamp. Signal too high
Układ
Tylny moduł elektroniczny (REM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Co oznacza ten kod błędu?
The module (REM) reads the xenon lamp position sensor. The fault code is set if the value it receives is too high, which comes from the signal cable being shorted to supply voltage, from the position sensor being fitted incorrectly, or from a faulty sensor. The road illumination and the automatic headlamp range control then stop working.
Możliwe przyczyny
- Signal cable shorted to supply voltage
- The xenon lamp position sensor is fitted incorrectly
- Faulty position sensor
Co możesz zrobić
- 1Check that the xenon lamp position sensor is correctly fitted
- 2With the ignition off, use a multimeter to check that the signal cable to the position sensor has no contact with supply voltage
- 3Check that the position sensor's supply and ground connections are secure and free from oxidation
- 4If the fault remains, have a workshop with diagnostic equipment check the position sensor and the REM
Objawy, które możesz zauważyć2
- The road surface is not illuminated
- The automatic headlamp range control does not work
Na co może wpływać usterka1
- The shortest headlamp range is used
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.