VOLVO
REM-E003 - Configuration fault. Faulty configuration
Układ
Tylny moduł elektroniczny (REM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Co oznacza ten kod błędu?
The rear electronic module (REM) checks its own configuration ID against the signal configuration that the central electronic module (CEM) sends out on the CAN network. If they do not match, or if communication between the REM and the CEM is or has been interrupted, the code is set. With an open circuit in both CAN wires, the REM only answers the diagnostic tool and normal CAN communication stops, which is known as expulsion mode.
Możliwe przyczyny
- Incorrect CAN configuration ID: the module is not meant for this vehicle, such as a used unit with different software or hardware
- Open circuit in the CAN wiring between the REM and the CEM
Co możesz zrobić
- 1Read the codes in the central electronic module (CEM) and deal with any codes for lost communication first
- 2With the negative battery lead disconnected, use a multimeter to check that the CAN wires between the REM and the CEM have no open circuit
- 3Check the connectors at the REM and the CEM for contact resistance and oxidation, and see whether they are fully seated
- 4If the wires are intact and the fault remains, a used control module with the wrong configuration may be the cause; have a workshop check the REM configuration
Objawy, które możesz zauważyć5
- Rear doors and the fuel filler cap do not lock or unlock
- Retractable headrest does not work
- Rear window heating does not work
- The fuel gauge shows zero
- The tail lamps do not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.