VOLVO
SAS-0023 - Steering wheel angle sensor signal A/B/IX/IY. Signal faulty. Intermittent fault
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
5 modeliS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Co oznacza ten kod błędu?
The wires for signals A, B, IX and IY are intermittently short-circuited to each other. The fault has occurred at some point but may not be active right now. It can also come from an internal fault in the sensor control module.
Możliwe przyczyny
- Signal wires for A, B, IX and IY short-circuited to each other
- Fault within the sensor control module
Co możesz zrobić
- 1Clear the code and road test the car to see whether it returns
- 2Check the cable between the sensor control module and the sensor for chafing, pinching and loose clips
- 3Make sure the connectors at the control module and the sensor are firmly seated and clean
- 4With diagnostic equipment, follow signals A, B, IX and IY in live data while turning the wheel and see whether any of them jumps in value
- 5Stability control stays off while the fault is present, so have a workshop repair it promptly
Objawy, które możesz zauważyć3
- Anti-spin warning lamp lit
- Stability function absent
- Anti-spin function not working
Na co może wpływać usterka2
- Stability control disconnected
- Anti-spin function blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.