VOLVO
SAS-C009404 - Steering Angle Sensor (SAS) analogue-digital converter. General fault information. Internal fault
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
1 modelXC90 (2003–)
Co oznacza ten kod błędu?
The signal pattern from the angle sensor's code wheel does not match, due to an internal fault in the sensor. The stability function is blocked while the fault is present. On cars built before early October 2010 the sensor software may need updating.
Możliwe przyczyny
- Internal fault in the angle sensor
Co możesz zrobić
- 1On cars built before early October 2010, a workshop should update the sensor software
- 2Drive at higher speed with full steering lock both ways; if no anti-spin lamp and no warning message appears in the instrument display, the contact reel should be replaced
- 3With diagnostic equipment, follow the counters for the fault status: many incorrect driving cycles point to a recurring fault, few to a temporary one
- 4If the fault returns after the contact reel is replaced, have a workshop replace the steering wheel module (SWM)
- 5The stability function stays blocked while the fault is present, so have a workshop repair it promptly
Objawy, które możesz zauważyć1
- Anti-spin warning lamp is on
Na co może wpływać usterka1
- Stability function blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.