Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    SAS-C1B0000
    VOLVO

    SAS-C1B0000 - Steering angle sensor. General Failure Information. No sub type information

    Układ

    Czujnik kąta skrętu kierownicy (SAS)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    4 modele

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Pokaż modele wg rocznika i silnika (8)
    • Volvo C30 (2007–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
    • Volvo C30 (2007–2013)2012–2013Tylko silnik: D4162T, D5204T, D5204T5
    • Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
    • Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
    • Volvo S40 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
    • Volvo S40 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5
    • Volvo V50 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
    • Volvo V50 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5

    Co oznacza ten kod błędu?

    The steering angle sensor (SAS) has registered that its calibration data in the EEPROM memory has been erased. Until the steering wheel is turned a short distance either way, the sensor reports to the brake control module (BCM) that it is not initiated, so the angle is unknown. The fault is an internal fault in the sensor.

    Możliwe przyczyny

    • Internal malfunction within the steering angle sensor (SAS).

    Co możesz zrobić

    1. 1Turn the steering wheel a short distance in either direction so the sensor recalibrates. The code may then disappear.
    2. 2If the code is still stored, clear it and test drive the car. With a diagnostic tool, check that the fault does not return.
    3. 3If the fault remains, have a workshop replace the steering angle sensor (SAS).
    4. 4The sensor affects the stability function. Have a workshop do the repair rather than working on the steering wheel yourself.

    Objawy, które możesz zauważyć2

    • The traction control warning lamp lights up
    • The stability control system does not work

    Na co może wpływać usterka1

    • Active yaw control (AYC) is blocked

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.