VOLVO
SAS-C1B0049 - Steering angle sensor. System Internal Failures. Internal electronic failure
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (17)
- Volvo C30 (2007–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2010–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010–2015
- Volvo XC60 (2009–)2010–2015
- Volvo XC70 (2008–)2010–2015
Co oznacza ten kod błędu?
Sitting in the lever module, the steering angle sensor (SAS) converts the signals from its magnetic sensors into digital values in two processors. The code is set when the converter's value is incorrect, and the fault lies in the sensor itself. The anti-spin, stability and AYC functions are affected.
Możliwe przyczyny
- Internal malfunction within the steering angle sensor (SAS).
Co możesz zrobić
- 1Start the engine, turn the wheel fully right, then fully left, and set it straight ahead. Check whether the code is still stored.
- 2With a diagnostic tool, read the counters. Many incorrect drive cycles compared with correct ones point to a recurring fault.
- 3If the code returns, have a workshop replace the steering wheel module (SWM).
- 4The angle sensor is part of the steering and stability system. Have a workshop diagnose and repair it rather than working on the wheel yourself.
Objawy, które możesz zauważyć5
- A yellow warning symbol and text message show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin and stability functions do not work
- The active chassis does not work
- The traction control warning lamp lights up
Na co może wpływać usterka2
- The sensor warns the other control modules that the data it sends is wrong
- Active yaw control (AYC) is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.