Przejdź do treści
    OBD Tuning
    WYŚLIJ DO NAS
    WYŚLIJ DO NAS
    Strona główna
    Kody błędów
    VOLVO
    SAS-C1B0064
    VOLVO

    SAS-C1B0064 - Steering angle sensor. Algorithm Based Failures. Signal plausibility failure

    Układ

    Czujnik kąta skrętu kierownicy (SAS)

    Modele Volvo, których dotyczy ten kod błędu

    Dotyczy następujących modeli:

    9 modeli

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Pokaż modele wg rocznika i silnika (9)
    • Volvo S60 (2011–)2011–2015
    • Volvo S80 (2007–)2010–2015
    • Volvo V40 (2013–)2013–2015
    • Volvo V40 Cross Country (2013–)2013–2015
    • Volvo V60 (2011–)2011–2015
    • Volvo V60 Cross Country (2015–)2015
    • Volvo V70 (2008–)2010–2015
    • Volvo XC60 (2009–)2010–2015
    • Volvo XC70 (2008–)2010–2015

    Co oznacza ten kod błędu?

    The code means the steering angle signal is implausible, because the wheel has been turned too quickly. The cause is a damaged sensor, which then sends incorrect information to the other control modules.

    Możliwe przyczyny

    • Damaged steering angle sensor.

    Co możesz zrobić

    1. 1With the ignition on, turn the wheel a short distance to the right and then to the left, and check whether the code is still stored.
    2. 2With a diagnostic tool, read the counters for the code. Many incorrect drive cycles compared with correct ones point to a recurring fault.
    3. 3If the code returns, have a workshop replace the steering wheel module (SWM).
    4. 4The steering angle sensor is part of the steering and stability system. Have a workshop carry out the repair rather than working on the wheel yourself.

    Objawy, które możesz zauważyć5

    • A yellow warning symbol and text message show in the display
    • The anti-spin and anti-skid warning lamp lights up or behaves abnormally
    • The anti-spin function does not work
    • The stability function does not work
    • The active chassis does not work

    Na co może wpływać usterka1

    • The sensor warns the other control modules that the data it sends is wrong

    Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.

    OBD Tuning

    Wiodące centrum ekspertów Szwecji w elektronice motoryzacyjnej. Oferujemy profesjonalną optymalizację silnika, naprawę sterowników i diagnostykę z gwarancją 12 miesięcy.

    Usługi

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    Baza danych & Diagnostyka

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    Producenci ECU

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Firma

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    • Optymalizacja silnika
    • Naprawa sterownika
    • Klonowanie modułów
    • Zestaw wskaźników
    • SRS / Poduszka powietrzna
    • Immobilizer

    • Baza danych sterowników
    • Katalog kodów DTC
    • Przewodniki diagnostyczne & Pomiary
    • Analizator błędów AI
    • Aktualności

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • O nas
    • Kontakt
    • Partnerzy warsztatów
    • Przewodnik wysyłki
    • Gwarancja
    • FAQ
    • Regulamin
    • Polityka prywatności
    • Mapa strony

    Odwiedź nas

    Gjuterigatan 29, Karlstad

    Zadzwoń do nas

    054-830 480

    Napisz do nas

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Wszelkie prawa zastrzeżone.