VOLVO
SAS-C1B0081 - Steering angle sensor. Bus Signal / Message Failures. Invalid serial data received
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The two processors in the steering angle sensor communicate with each other and continually check that the information between them matches. The code is set when the control module detects a communication fault between the processors. The fault lies in the steering angle sensor itself.
Możliwe przyczyny
- Internal malfunction within the steering angle sensor (SAS).
Co możesz zrobić
- 1Clear the code and drive normally for a while. Check whether it returns.
- 2With a diagnostic tool, read the drive-cycle counter. Many incorrect drive cycles point to a recurring fault.
- 3If the code returns, have a workshop replace the steering wheel module (SWM).
- 4The angle sensor is linked to the anti-spin and stability systems. Have a workshop diagnose and repair it rather than working on the wheel yourself.
Objawy, które możesz zauważyć5
- A text message and yellow warning symbol show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
- The active chassis does not work
Na co może wpływać usterka1
- The sensor warns the other control modules that the data it sends is wrong
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.