VOLVO
SAS-C1B0085 - Steering angle sensor. Bus Signal / Message Failures. Signal above allowable range
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The steering angle sensor (SAS) is reporting a steering angle larger than the wheel can physically be turned. This almost always means the sensor or the clock spring has been fitted one turn out or is incorrectly adjusted. The other systems are then told that the steering angle cannot be trusted.
Możliwe przyczyny
- The steering angle sensor is misadjusted, for example after a wheel alignment or steering work
- The sensor or clock spring has been fitted one turn out
- Damaged steering angle sensor
Co możesz zrobić
- 1Find out whether the steering wheel, steering wheel airbag, clock spring or steering has recently been removed or serviced
- 2Have a workshop check that the steering angle reads zero with the wheels straight ahead and calibrate the sensor
- 3If the sensor was fitted one turn out, the clock spring may have been damaged at full lock and need replacing
- 4Drive carefully, as the stability systems are not working
Objawy, które możesz zauważyć3
- Yellow warning symbol and message in the display
- Traction and stability control do not work
- The active chassis does not work
Na co może wpływać usterka1
- The module tells the other systems that the steering angle is invalid, and the functions that need it are disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.