VOLVO
SAS-C1B0092 - Steering angle sensor. Component Failures. Performance or incorrect operation
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
13 modeliC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (17)
- Volvo C30 (2007–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo S60 (2011–)2011–2015
- Volvo S80 (2007–)2010–2015
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V60 (2011–)2011–2015
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010–2015
- Volvo XC60 (2009–)2010–2015
- Volvo XC70 (2008–)2010–2015
Co oznacza ten kod błędu?
The steering angle sensor has two magnetic sensors that read the steering wheel position. The code is set when either of them gives an unreasonable value. The fault may be a damaged sensor or an internal fault in the sensor, and the anti-spin and stability functions are affected.
Możliwe przyczyny
- Damaged steering angle sensor.
- Internal fault in the steering angle sensor (SAS).
Co możesz zrobić
- 1Turn the wheel fully right and then fully left with the ignition on, then set it straight ahead. Check whether the code is still stored.
- 2With a diagnostic tool, read the counters. Many incorrect drive cycles point to a recurring fault, while few point to a temporary one.
- 3If the code returns after replacing the contact reel or angle sensor, the steering wheel module (SWM) must also be replaced. Have a workshop do this.
- 4The angle sensor affects the anti-spin and stability functions. Have a workshop carry out the repair rather than working on the wheel yourself.
Objawy, które możesz zauważyć4
- A yellow warning symbol and text message show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin, stability and active chassis functions do not work
- The traction control warning lamp lights up
Na co może wpływać usterka2
- The sensor warns the other control modules that the data it sends is wrong
- Active yaw control (AYC) is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.