VOLVO
SAS-U210000 - Control Module Not Configured. General Failure Information. No sub type information
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (8)
- Volvo C30 (2007–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5
Co oznacza ten kod błędu?
The steering angle sensor (SAS) receives information about the car's configuration from the central electronic module (CEM). The code is set when that information is lost. Fault tracing is then carried out in the CEM, since that module sends the information.
Możliwe przyczyny
- The fault lies in the module sending the vehicle configuration, which is the central electronic module (CEM).
Co możesz zrobić
- 1Check that the fuses are intact. Their location is shown in the owner's manual or on the fuse box cover.
- 2With a diagnostic tool, read the fault codes in the CEM and note which ones are present.
- 3Have a workshop fault-trace the CEM, since the vehicle configuration comes from there.
- 4The angle sensor is part of the steering and stability system. Have a workshop carry out the fault tracing rather than working on the steering wheel yourself.
Objawy, które możesz zauważyć4
- A yellow warning symbol and text message show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.