VOLVO
SAS-U210195 - Control Module Configuration Incompatible. Component Failures. Incorrect assembly
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (8)
- Volvo C30 (2007–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo C30 (2007–2013)2012–2013Tylko silnik: D4162T, D5204T, D5204T5
- Volvo C70 (2006–2013)2011Tylko silnik: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Wszystkie silniki oprócz: B5254T7
- Volvo S40 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo S40 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5
- Volvo V50 (2004–2013)2011Tylko silnik: D4162T, D4164T, D5204T, D5204T5
- Volvo V50 (2004–2013)2012Tylko silnik: D4162T, D5204T, D5204T5
Co oznacza ten kod błędu?
This code means the buttons in the steering wheel or other components do not match the car's equipment. The sensor compares its configuration with the one that the central electronic module (CEM) sends. The code can be set, for example, when there are rear wiper buttons in a car without a rear wiper, or when a button is pressed that should not be fitted to that car.
Możliwe przyczyny
- Wrong variant of component fitted.
- Component fitted incorrectly.
Co możesz zrobić
- 1Check that the buttons on the steering wheel suit the car's equipment, such as cruise control, rain sensor and rear wiper.
- 2If you have pressed a button that should not be fitted to your car, the code may be set.
- 3Have a workshop read the fault codes and check the configuration of the angle sensor and the steering wheel components.
- 4The angle sensor is part of the steering and stability system. Have a workshop carry out the check rather than working on the steering wheel yourself.
Objawy, które możesz zauważyć4
- A yellow warning symbol and text message show in the display
- The anti-spin and anti-skid warning lamp lights up or behaves abnormally
- The anti-spin function does not work
- The stability function does not work
Na co może wpływać usterka1
- The sensor cannot communicate normally on the CAN network
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.