VOLVO
SAS-U300014 - Control Module. General Electrical Failures. Circuit short to ground or open
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The code applies to an electrical fault in the internal voltage supply to the steering angle sensor, and the cause is an open circuit in that supply. The sensor sits in the lever module with the steering wheel module, which supplies its power.
Możliwe przyczyny
- Open circuit in the internal voltage supply circuit to the steering angle sensor.
Co możesz zrobić
- 1With the engine running, turn the wheel fully right and then fully left, and check whether the code is still stored.
- 2With a diagnostic tool, read the counters for the code and see whether the fault occurs often or rarely.
- 3Check that the fuses supplying the steering wheel module are intact in the car's fuse box.
- 4If the fault returns, have a workshop replace the contact reel or angle sensor. If the code comes back after that, the steering wheel module (SWM) must also be replaced.
- 5The angle sensor is part of the stability system. Have a workshop carry out the repair rather than working on the steering wheel yourself.
Objawy, które możesz zauważyć5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Na co może wpływać usterka1
- The sensor warns the other control modules that the data it sends is wrong
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.