VOLVO
SAS-U300044 - Control Module. System Internal Failures. Data memory failure
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The steering angle sensor has registered a fault in its internal memory. The fault is caused by a damaged sensor.
Możliwe przyczyny
- Damaged steering angle sensor.
Co możesz zrobić
- 1With the engine running, check whether the code is still stored after the wheel has been turned fully one way and then the other.
- 2With a diagnostic tool, read the counters and see whether the fault occurs often or rarely.
- 3If the fault returns often, have a workshop replace the contact reel or angle sensor. If the code comes back after that, the steering wheel module (SWM) must be replaced.
- 4The angle sensor is part of the steering and stability system. Have a workshop diagnose and replace it rather than working on the steering wheel yourself.
Objawy, które możesz zauważyć5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Na co może wpływać usterka1
- The sensor warns the other control modules that the data it sends is wrong
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.