VOLVO
SAS-U300087 - Control Module. Bus Signal / Message Failures. Missing message
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The sensor gets word from the central electronic module (CEM) on the ignition key position. The code is set when that information is missing or wrong for longer than a threshold. The cause then lies in the CEM, and fault tracing continues there.
Możliwe przyczyny
- Key-position data sent by the CEM is absent or incorrect.
- The cause of the fault is in the central electronic module (CEM).
Co możesz zrobić
- 1If the code was set while the key was removed, it can be ignored.
- 2With a diagnostic tool, read the stored values from when the code was set, and read the fault codes in the CEM.
- 3Have a workshop fault-trace the central electronic module (CEM), since fault tracing continues there.
- 4The angle sensor is part of the stability system. Have a workshop do the fault tracing rather than working on the steering wheel yourself.
Objawy, które możesz zauważyć5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Na co może wpływać usterka1
- The sensor warns the other control modules that the data it sends is wrong
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.