VOLVO
SAS-U300092 - Control Module. Component Failures. Performance or incorrect operation
Układ
Czujnik kąta skrętu kierownicy (SAS)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (4)
Co oznacza ten kod błędu?
The code is set when the sensor registers that the steering wheel has been turned too far from centre, too quickly, or beyond the physical stops in the steering column. The fault may be a misadjusted, incorrectly fitted or damaged angle sensor.
Możliwe przyczyny
- The steering angle sensor is misadjusted.
- The steering angle sensor is fitted incorrectly.
- The steering angle sensor is damaged.
Co możesz zrobić
- 1Check that the steering wheel is straight when the wheels point straight ahead. If it is not, the contact reel may be misadjusted.
- 2Consider whether the car recently ran into a kerb or similar, since that can make the steering wheel turn suddenly.
- 3Have a workshop check that the contact reel is correctly fitted and adjusted and that the front wheel alignment has not changed. Replace the contact reel if it may be damaged.
- 4Clear the code and check whether it returns after a test drive.
Objawy, które możesz zauważyć5
- The information lamp lights up
- The anti-spin warning lamp lights up
- Traction control does not work
- The stability function does not work
- The Four-C function does not work
Na co może wpływać usterka1
- The sensor warns the other control modules that the data it sends is wrong
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.