VOLVO
SUM-E000 - Control module communication
Układ
Moduł aktywnego podwozia (SUM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007)
Pokaż modele wg rocznika i silnika (7)
Co oznacza ten kod błędu?
The SUM cannot communicate over the car's CAN network, the network the control modules use to exchange information. The fault code is set when the SUM detects that the communication has stopped.
Możliwe przyczyny
- Contact resistance in the connections
- A break in one or both signal wires in the CAN network
- One or both signal wires are short-circuited to ground, to voltage or to each other
- Faulty suspension control module (SUM)
Co możesz zrobić
- 1Read the fault codes in all control modules, clear them and road test the car: communication faults often show in several modules at once
- 2Check that the relevant fuses are intact; their locations are in the owner's manual
- 3Has any work been done on the car's electrical system recently? Tell the workshop if you take the car in
- 4Check that the connectors at the SUM and along the CAN wiring are firm and free from corrosion
- 5Inspect the wiring for chafing and pinch damage
- 6If the fault returns, have a workshop with diagnostic equipment check the CAN network, since a faulty message may originate in any module on the network
Objawy, które możesz zauważyć3
- General warning lamp on
- A message appears in the information display
- The Four-C function does not work
Na co może wpływać usterka2
- CAN communication stops
- Four-C regulation is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.