TCM-0592
VOLVO
TCM-0592 - Gear shift solenoid driver, even gears. Short to ground
Układ
Sterownik automatycznej skrzyni biegów (TCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (10)
- Volvo C30 (2007–2013)2008Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo C30 (2007–2013)2009–2010Tylko silnik: B4204S3, D4204T · Tylko skrzynia biegów: MPS6
- Volvo C30 (2007–2013)2011–2013Tylko silnik: B4204S3 · Tylko skrzynia biegów: MPS6
- Volvo C70 (2006–2013)2009–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo S40 (2004–2013)2008Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo S40 (2004–2013)2009–2010Tylko silnik: B4204S3, D4204T · Tylko skrzynia biegów: MPS6
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4204S3 · Tylko skrzynia biegów: MPS6
- Volvo V50 (2004–2013)2008Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo V50 (2004–2013)2009–2010Tylko silnik: B4204S3, D4204T · Tylko skrzynia biegów: MPS6
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4204S3 · Tylko skrzynia biegów: MPS6
Co oznacza ten kod błędu?
The output stage for solenoid SHSS2, which controls the shifts for the even gears, is shorted to ground. The solenoid also controls the shift forks. The cause is a damaged or dirty connector or circuit board, a damaged solenoid, or a damaged transmission control module.
Możliwe przyczyny
- Connector or circuit board damaged or dirty
- Damaged solenoid
- Damaged transmission control module (TCM)
Co możesz zrobić
- 1Read the fault codes, clear TCM-0592 and drive the car with gear changes to see whether the code returns
- 2Have a workshop open the transmission control system and check solenoid SHSS2 visually for oxidation, dirt and metal deposits
- 3Have a workshop check the transmission oil level
- 4If the fault cannot be found or fixed, a workshop must replace the mechatronic unit
Objawy, które możesz zauważyć5
- Malfunction Indicator Light (check engine) lit or behaving abnormally
- Yellow warning symbol and text message in the display
- Shifts hard or jerky
- No automatic gear changes
- No forward or reverse movement with a gear selected
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.