TCM-05A2
VOLVO
TCM-05A2 - Hydraulic pressure solenoid driver, odd gears. Current to high
Układ
Sterownik automatycznej skrzyni biegów (TCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (10)
- Volvo C30 (2007–2013)2008Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo C30 (2007–2013)2009–2010Tylko silnik: B4204S3, D4204T · Tylko skrzynia biegów: MPS6
- Volvo C30 (2007–2013)2011–2013Tylko silnik: B4204S3 · Tylko skrzynia biegów: MPS6
- Volvo C70 (2006–2013)2009–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo S40 (2004–2013)2008Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo S40 (2004–2013)2009–2010Tylko silnik: B4204S3, D4204T · Tylko skrzynia biegów: MPS6
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4204S3 · Tylko skrzynia biegów: MPS6
- Volvo V50 (2004–2013)2008Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo V50 (2004–2013)2009–2010Tylko silnik: B4204S3, D4204T · Tylko skrzynia biegów: MPS6
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4204S3 · Tylko skrzynia biegów: MPS6
Co oznacza ten kod błędu?
The current in the circuit for the output stage of solenoid CSPS1, which controls the hydraulic pressure over the clutch for the odd gears, is too high. The fault is caused by damaged cables or a damaged circuit board, or by a damaged transmission control module.
Możliwe przyczyny
- Damaged cables or circuit board
- Damaged transmission control module (TCM)
Co możesz zrobić
- 1Read the fault codes, clear TCM-05A2 and drive the car to see whether it comes back
- 2Have a workshop check the cables and circuit board in the transmission with diagnostic equipment
- 3If the fault remains after this check, a workshop must replace the transmission control module
Objawy, które możesz zauważyć5
- Malfunction Indicator Light (check engine) lit or behaving abnormally
- Yellow warning symbol and text message in the display
- No automatic gear changes
- No forward or reverse movement with a gear selected
- Shifts hard or jerky
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.