TCM-05B0
VOLVO
TCM-05B0 - Hydraulic pressure solenoid, even gears. Open circut
Układ
Sterownik automatycznej skrzyni biegów (TCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
4 modeleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Pokaż modele wg rocznika i silnika (10)
- Volvo C30 (2007–2013)2008Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo C30 (2007–2013)2009–2010Tylko silnik: B4204S3, D4204T · Tylko skrzynia biegów: MPS6
- Volvo C30 (2007–2013)2011–2013Tylko silnik: B4204S3 · Tylko skrzynia biegów: MPS6
- Volvo C70 (2006–2013)2009–2010Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo S40 (2004–2013)2008Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo S40 (2004–2013)2009–2010Tylko silnik: B4204S3, D4204T · Tylko skrzynia biegów: MPS6
- Volvo S40 (2004–2013)2011–2012Tylko silnik: B4204S3 · Tylko skrzynia biegów: MPS6
- Volvo V50 (2004–2013)2008Tylko silnik: D4204T · Tylko skrzynia biegów: MPS6
- Volvo V50 (2004–2013)2009–2010Tylko silnik: B4204S3, D4204T · Tylko skrzynia biegów: MPS6
- Volvo V50 (2004–2013)2011–2012Tylko silnik: B4204S3 · Tylko skrzynia biegów: MPS6
Co oznacza ten kod błędu?
Solenoid CSPS2 has an open circuit. It controls the hydraulic pressure over the clutch for the even gears, and the solenoids sit in the transmission's mechatronic unit. The fault is caused by a damaged solenoid, a damaged or dirty connector or circuit board, or a damaged transmission control module.
Możliwe przyczyny
- Damaged solenoid
- Connector or circuit board damaged or dirty
- Damaged transmission control module (TCM)
Co możesz zrobić
- 1Read the fault codes, clear TCM-05B0 and drive the car to see whether the code returns
- 2Have a workshop open the transmission control system and check solenoid CSPS2 visually for corrosion, poor contact, dirt or metal build-up
- 3Have a workshop check the transmission oil level
- 4If the fault cannot be found or fixed, a workshop must replace the mechatronic unit
Objawy, które możesz zauważyć5
- Malfunction Indicator Light (check engine) lit or behaving abnormally
- Yellow warning symbol and text message in the display
- Shifts hard or jerky
- No automatic gear changes
- Shifts too early, too late or too often
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.