VOLVO
TCM-P060668 - Control module processor. Algorithm Based Failures. Event information
Układ
Sterownik automatycznej skrzyni biegów (TCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo S60 (2011–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo S80 (2007–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo V40 (2013–)2015Tylko skrzynia biegów: TG-81SC
- Volvo V40 Cross Country (2013–)2015Tylko skrzynia biegów: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo V60 Cross Country (2015–)2015Tylko skrzynia biegów: TG-81SC
- Volvo V70 (2008–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo XC60 (2009–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo XC70 (2008–)2014–2015Tylko skrzynia biegów: TG-81SC
Co oznacza ten kod błędu?
This is an event-driven information code, and it does not point to a fault in the module where it is active. The transmission control module keeps checking the speed signals and the gearbox output speed, and during braking it checks that they agree. If a fault is found, the gearbox is disconnected into neutral, so that a wrong or locked gear cannot occur.
Możliwe przyczyny
- Break or short on the CAN wire running between the BCM and the transmission module, which may come and go
- Damaged output speed sensor
- Damaged wheel sensor
- Internal fault in the transmission control module
Co możesz zrobić
- 1Read the fault codes in the brake control module (BCM) and fix them first; then clear the fault code
- 2With the ignition off, check the CAN wire between the brake control module and the transmission control module for breaks, chafing and loose connectors
- 3Use a multimeter to check that the CAN wire is not shorted to ground or supply voltage
- 4Have a workshop check the output speed sensor and wheel sensors with diagnostic equipment, as they are part of the fault check
- 5Do not work on the brake system or the wheel sensors yourself; have a workshop carry out the troubleshooting there
Objawy, które możesz zauważyć1
- The automatic gearbox shifts harshly or jerkily
Na co może wpływać usterka1
- The gearbox is disconnected into neutral
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.