TCM-U003900
VOLVO
TCM-U003900 - Lost Communication With Engine Control Module (ECM) on communication bus "B". General Failure Information. No sub type information
Układ
Sterownik automatycznej skrzyni biegów (TCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (9)
- Volvo S60 (2011–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo S80 (2007–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo V40 (2013–)2015Tylko skrzynia biegów: TG-81SC
- Volvo V40 Cross Country (2013–)2015Tylko skrzynia biegów: TG-81SC, TG-81SC AWD
- Volvo V60 (2011–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo V60 Cross Country (2015–)2015Tylko skrzynia biegów: TG-81SC
- Volvo V70 (2008–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo XC60 (2009–)2014–2015Tylko skrzynia biegów: TG-81SC
- Volvo XC70 (2008–)2014–2015Tylko skrzynia biegów: TG-81SC
Co oznacza ten kod błędu?
The transmission control module (TCM) is receiving no communication from the engine control module (ECM) on bus B. The fault most likely lies in the wiring between the two control modules, but it can also be in the engine control module. The code gives no specific fault type, only that communication has been interrupted.
Możliwe przyczyny
- Brief open circuit or short on the CAN wire linking the engine module (ECM) to the gearbox module (TCM)
- Fault in the engine control module (ECM)
- Incorrect signal configuration, for example if a control module has been replaced without new software being loaded
Co możesz zrobić
- 1Read codes from the engine control module (ECM) and the central electronic module (CEM) and deal with them first
- 2Clear the code and see whether it comes back; if it does not, the fault was most likely temporary
- 3Check the connectors and wiring of the CAN network between engine and gearbox for looseness, corrosion and damage
- 4Have a workshop load new software into the control module if the code is only present in the gearbox
Objawy, które możesz zauważyć1
- No noticeable symptoms for the driver
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.