VOLVO
TRM-B110262 - Trailer stop lamp. Algorithm Based Failures. Signal compare failure
Układ
Moduł haka holowniczego (TRM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The tow hitch control module (TRM) compares the brake light signal from the direct wire from the central electronic module (CEM) with the signal on the CAN network, and the two do not agree. The fault lies in wiring, connectors or the CAN wire. Normally nothing is noticed, but in extreme cases the trailer lighting does not work.
Możliwe przyczyny
- Open circuit in the wire
- Wire short-circuited to ground
- Contact resistance or oxidation in the connections
- Short circuit in the connections
- Open circuit in the CAN wire
Co możesz zrobić
- 1Check the connectors to the tow hitch control module and to the rear light for looseness, oxidation and contact resistance
- 2Use a multimeter to check that the wire has no open circuit or contact with ground
- 3Remove any trailer connector from the socket before troubleshooting
- 4Have a workshop check the CAN wire if the fault remains after these checks
Objawy, które możesz zauważyć4
- The trailer lamps do not work as they should
- Information lamp lit
- Message in the text display
- In extreme cases the trailer lighting does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.