VOLVO
TRM-U001055 - Medium Speed CAN Communication Bus. System Programming Failures. Not configured
Układ
Moduł haka holowniczego (TRM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The tow hitch control module (TRM) has a configuration number on MS-CAN that does not match the one the central electronic module (CEM) sends out. The fault may be because the module is not intended for this particular car, or because of a break in the wiring between the module and the CEM.
Możliwe przyczyny
- Incorrect configuration ID, for example if the module is second-hand and has different software or hardware
- Break in the CAN wiring linking the tow hitch module with the CEM
Co możesz zrobić
- 1Check whether the tow hitch control module is second-hand or has been replaced, and if so that the correct software for the car has been loaded
- 2Have a workshop program the tow hitch control module with the latest software
- 3Check the connectors and wiring linking the tow hitch module with the CEM for looseness, corrosion and damage
- 4Clear the code only once the work is done, and check that it does not return
Objawy, które możesz zauważyć1
- Trailer lighting does not work
Na co może wpływać usterka3
- The module stops sending messages on the CAN network
- The module's functions stop working
- The module responds to diagnostic commands, but normal CAN communication does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.