VOLVO
ADM-0004 - Tank level, additive. Fault-tracing information
System
Additive Dosing Module (ADM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (8)
- Volvo C30 (2007–2013)2007–2010Engine D4164T, D4204T only
- Volvo C30 (2007–2013)2011Engine D4164T only
- Volvo C70 (2006–2013)2008–2010Engine D4204T only
- Volvo S40 (2004–2013)2005–2010Engine D4164T, D4204T only
- Volvo S40 (2004–2013)2011Engine D4164T only
- Volvo V50 (2004–2013)2005–2006Engine D4164T, D4204T, D4204T2 only
- Volvo V50 (2004–2013)2007–2010Engine D4164T, D4204T only
- Volvo V50 (2004–2013)2011Engine D4164T only
What does this fault code mean?
The ADM keeps track of how much additive the tank holds. The level has dropped so low that only a small amount of additive remains. The code works as a reminder that the tank needs topping up, and it is set when the tank is empty or nearly empty.
Possible causes
- Low level in the additive tank
- Codes stored for the additive level sensor
- Damaged additive dosing module (ADM)
What you can do
- 1Check whether the codes for the additive level sensor, ADM-0002 or ADM-0003, are stored and deal with those first
- 2Top up the additive tank and check that the code clears
- 3Clear the code and road test to see whether it returns
- 4If the code returns after topping up and no cause is found, the additive tank may need replacing
- 5Restart the module with diagnostic equipment after any repair
Symptoms you may notice3
- Emissions warning lamp lit
- Message in the text window of the display
- Yellow warning symbol and text message in the display
General guidance for car owners. Diagnosis on the car can point to a different cause.