VOLVO
ADM-0005 - Tank level, additive. Fault-tracing information
System
Additive Dosing Module (ADM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (8)
- Volvo C30 (2007–2013)2007–2010Engine D4164T, D4204T only
- Volvo C30 (2007–2013)2011Engine D4164T only
- Volvo C70 (2006–2013)2008–2010Engine D4204T only
- Volvo S40 (2004–2013)2005–2010Engine D4164T, D4204T only
- Volvo S40 (2004–2013)2011Engine D4164T only
- Volvo V50 (2004–2013)2005–2006Engine D4164T, D4204T, D4204T2 only
- Volvo V50 (2004–2013)2007–2010Engine D4164T, D4204T only
- Volvo V50 (2004–2013)2011Engine D4164T only
What does this fault code mean?
The ADM has registered that the additive tank is running low. Without enough additive the particulate filter cannot regenerate as it should. The code is usually a reminder that the tank is empty or nearly empty and needs topping up.
Possible causes
- Additive used up in the tank
- Codes stored for the additive level sensor
- Damaged additive dosing module (ADM)
What you can do
- 1Top up the additive tank and check that the code clears
- 2Check that the codes for the additive level sensor, ADM-0002 or ADM-0003, are not stored, and deal with those first
- 3Clear the code and road test to see whether it returns
- 4Restart the module with diagnostic equipment after any repair
Symptoms you may notice3
- Message in the text window of the display
- Yellow warning symbol and text message in the display
- Maintenance or service indication in the display
General guidance for car owners. Diagnosis on the car can point to a different cause.