VOLVO
ADM-0009 - Control module. Incorrect configuration
System
Additive Dosing Module (ADM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (9)
- Volvo C30 (2007–2013)2007–2010Engine D4164T, D4204T only
- Volvo C30 (2007–2013)2011Engine D4164T only
- Volvo C70 (2006–2013)2008–2010Engine D4204T only
- Volvo S40 (2004–2013)2005–2006Engine D4164T, D4204T, D4204T2 only
- Volvo S40 (2004–2013)2007–2010Engine D4164T, D4204T only
- Volvo S40 (2004–2013)2011Engine D4164T only
- Volvo V50 (2004–2013)2005–2006Engine D4164T, D4204T, D4204T2 only
- Volvo V50 (2004–2013)2007–2010Engine D4164T, D4204T only
- Volvo V50 (2004–2013)2011Engine D4164T only
What does this fault code mean?
The additive dosing module (ADM) checks the parameters sent by the central electronic module (CEM). If a parameter is incorrect or missing, the code is set. The fault most often happens when a module or function has been added to or removed from the car without the configuration being updated.
Possible causes
- Fault in the CAN communication
- A control module or function has been added or removed without the vehicle configuration being updated
What you can do
- 1Ask whether any module or function has recently been added, removed or replaced in the car
- 2Have a workshop check that the car configuration has been updated after any such change
- 3Read the codes in the central electronic module and the other control modules and deal with those first
- 4Clear the code and check whether it returns
- 5If the fault remains, have a workshop with diagnostic equipment work through the configuration
Symptoms you may notice1
- Message in the text window of the display
General guidance for car owners. Diagnosis on the car can point to a different cause.