VOLVO
ADM-000B - Fuel level. Faulty signal
System
Additive Dosing Module (ADM)
Volvo models this fault code applies to
Applies to the following models:
4 modelsC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Show models by year and engine (9)
- Volvo C30 (2007–2013)2007–2010Engine D4164T, D4204T only
- Volvo C30 (2007–2013)2011Engine D4164T only
- Volvo C70 (2006–2013)2008–2010Engine D4204T only
- Volvo S40 (2004–2013)2005–2006Engine D4164T, D4204T, D4204T2 only
- Volvo S40 (2004–2013)2007–2010Engine D4164T, D4204T only
- Volvo S40 (2004–2013)2011Engine D4164T only
- Volvo V50 (2004–2013)2005–2006Engine D4164T, D4204T, D4204T2 only
- Volvo V50 (2004–2013)2007–2010Engine D4164T, D4204T only
- Volvo V50 (2004–2013)2011Engine D4164T only
What does this fault code mean?
The ADM has flagged the main fuel level reading on the data network as wrong. The signal comes from the central electronic module (CEM), so the fault usually starts there.
Possible causes
- Fault in the central electronic module (CEM), which sends the fuel level signal
What you can do
- 1Read the codes in the central electronic module (CEM) first and deal with them
- 2Clear the code only after the fault in the CEM has been fixed
- 3Check the battery and its terminals, since voltage problems can disturb the data network
- 4If the fault remains, have a workshop with diagnostic equipment check the data network and the CEM
- 5Do not replace the CEM until a workshop has investigated the data network and confirmed an internal fault
Symptoms you may notice1
- Emissions warning lamp lit
General guidance for car owners. Diagnosis on the car can point to a different cause.