VOLVO
ADM-P19277B - Fuel Additive Level Too Low/Empty. Mechanical Failures. Low fluid level
System
Additive Dosing Module (ADM)
Volvo models this fault code applies to
Applies to the following models:
2 modelsS80 (2007–), V70 (2008–)
Show models by year and engine (2)
What does this fault code mean?
The additive level in the tank is so low that only a small amount remains, or the tank is empty, and the ADM has registered this. The code concerns the fluid level in the first place and is usually cleared by topping up the tank.
Possible causes
- No additive left in the tank
- Codes stored for the additive level sensor
- Damaged additive dosing module (ADM)
What you can do
- 1Check whether the codes ADM-P192229 or ADM-P192329 are stored and deal with those first
- 2Top up the additive tank and check that the code clears
- 3Clear the code and road test to see whether it returns
- 4Restart the module with diagnostic equipment after any repair
Symptoms you may notice1
- Emissions warning lamp lit
General guidance for car owners. Diagnosis on the car can point to a different cause.