VOLVO
AUM-1000 - Memory control Audio HU1205. Faulty signal
System
Audio Unit Module (AUM)
Volvo models this fault code applies to
Applies to the following models:
2 modelsS40 (1996–2004), V40 (1996–2004)
Show models by year and engine (2)
What does this fault code mean?
The audio unit (AUM) has detected an internal memory fault as the ignition comes on, and the code shows an incorrect signal in its memory. The fault normally lies in a defective audio unit. Navigation and the audio system may then stop working, and the position shown on the map can be wrong.
Possible causes
- Defective audio unit
What you can do
- 1Read and note all stored codes before anything is cleared
- 2Use diagnostic equipment to establish whether the fault is permanent or intermittent
- 3If the code is not stored after a test run, the fault was probably temporary
- 4Replace the audio unit if the fault remains; after replacement it can take a while before GPS signals are received correctly
Symptoms you may notice5
- The map shows the vehicle in the wrong place
- The audio system does not work
- Navigation and traffic information do not work
- The display colour is wrong
- There is no voice guidance
What the fault can affect1
- The navigation system does not work
General guidance for car owners. Diagnosis on the car can point to a different cause.