VOLVO
BCM-0052 - Control module. Internal fault
System
Brake Control Module (BCM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012All engines except: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Engine B4204S3, B4204S4, B5254T7 only
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Engine B5254T7 only
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012All engines except: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006All engines except: B8444S
- Volvo XC90 (2003–)2007Engine B5254T2, D5244T4 only
- Volvo XC90 (2003–)2008–2010All engines except: B6324S, B8444S
- Volvo XC90 (2003–)2011All engines except: B6324S5, B8444S
- Volvo XC90 (2003–)2012All engines except: B6324S5
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
What does this fault code mean?
The brake control module (BCM) has detected an internal fault. The fault may be caused by interference that has affected the module's calculations, or by a genuine fault in the module itself.
Possible causes
- Electrical interference that has affected the module's calculations
- Fault inside the brake control module (BCM)
What you can do
- 1Read the codes and deal with any other stored codes in the other modules first
- 2Have a workshop replace the brake control module and program or calibrate it, as a new unit is supplied without software and must be calibrated after fitting
- 3After fitting, check that ABS, traction control and stability control work
- 4The brake system is safety critical: do not work on the brake control module yourself
Symptoms you may notice5
- General warning lamp on
- ABS warning lamp on
- The brake circuit does not work and the warning lamp comes on
- ABS, traction control, stability and anti-skid do not work
- Traction control does not work
What the fault can affect3
- ABS is disabled
- Electronic brake force distribution (EBD), traction control, stability control and brake assist are disabled
- Active yaw control (AYC) is disabled
General guidance for car owners. Diagnosis on the car can point to a different cause.