VOLVO
BCM-0112 - Active yaw control sensor. Sensor not calibrated
System
Brake Control Module (BCM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
5 modelsS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Show models by year and engine (11)
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006All engines except: B8444S
- Volvo XC90 (2003–)2007Engine B5254T2, D5244T4 only
- Volvo XC90 (2003–)2008–2010All engines except: B6324S, B8444S
- Volvo XC90 (2003–)2011All engines except: B6324S5, B8444S
- Volvo XC90 (2003–)2012All engines except: B6324S5
- Volvo XC90 (2003–)2013–2014Engine B5254T9 only
What does this fault code mean?
When the sensors that make up the stability function (AYC) are calibrated, a checksum is stored in the brake control module. At each start-up the module compares the stored checksum with a newly calculated one. The code is set if they do not match. It can appear after new software has been downloaded, in which case it only needs clearing.
Possible causes
- Interference or noise that has affected the brake control module
- Defective control module
What you can do
- 1If the code was stored during a software download, clearing it may be enough; then check that it does not return
- 2Have a workshop calibrate the brake system with the car standing level and the brake pedal untouched
- 3The brake system is safety critical: do not calibrate the stability sensors yourself, and drive carefully until the fault is fixed
Symptoms you may notice5
- Anti-spin warning lamp on
- General yellow warning lamp on
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
What the fault can affect1
- Traction control (TC), stability control (SC) and active yaw control (AYC) are disabled
General guidance for car owners. Diagnosis on the car can point to a different cause.